To completely remove and reinstall TokenLock, follow these directions:
Step 1: Save your serial number
Your serial number is shown on the left hand side of the main TokenLock settings screen:
Save this, as it is the activation code to enable TokenLock after any trial period has expired.
Step 2: Saving your serial number if TokenLock won't even run:
Open a terminal (Applications->Utilities->Terminal) and type:
defaults read com.mappin.tokenlock | grep LUUID
to extract and save your serial number so that you can activate your fresh install. You should see a line like this:
LUUID = "8677737274-7774827684-7374768473-74";
Step 3: Deleting TokenLock Preferences
Once you have saved this serial number, you can remove all the settings by typing the following in the terminal window:
defaults delete com.mappin.tokenlock
Step 4: Removing Tokenlock
Open Applications and drag TokenLock into the trash… remember to empty the trash too!
Step 5: Removing the TokenLock saved password
Use Keychain Access (Applications -> Utilities -> Keychain Access) and do a search for TokenLock. Remove the TokenLockAdminPassword entry.
Step 6: Download and reinstall Tokenlock.
You can do this by clicking here.
Remember to check for updates!
Step 7: When asked, enter the serial number.
In my case, that number is 8677737274-7774827684-7374768473-74